-
•
2019-09-17 14:44:32
Common wire connection precautions during wire harness processing Some common connecting wires, electronic wires, and automotive wire harness wire connections in the wire harness processing process need to pay attention to some matters: Har
-
•
2019-09-17 14:44:12
Motorcycle wire harness wholesalers introduces the so-called new energy vehicle power harness refers to the large square cable that drives the car, such as battery modules, motors, and transmission systems. Choose the right cutting equipmen
-
•
2019-09-17 14:43:47
The competition in the electronic wire harness industry is becoming more and more fierce. If it does not change without growing, it means being eliminated. The technical capability of the electronic wire harness manufacturer is the basic co
-
•
2019-09-17 14:43:09
Motorcycle wire harness wholesalers introduces Bad wire crimping results 1. The pull-out force is too small: the core and the terminal are connected or disconnected. 2, the general pressure connection will lead to a lot of cost waste, and r
-
•
2019-09-17 14:42:50
Motorcycle wire harness wholesalers poor peeling size: The next process (clamping) cannot be operated normally, which leads to the failure of the finished product. 2. Poor wire size: The wire size is too short, resulting in unqualified fini
-
•
2019-09-17 14:40:44
Shielding interference source equipment and related wiring harness: Motorcycle wire harness wholesalers introduces the electronic control unit used in the main electronic control system of the automobile should be packaged in a shielded hou
-
•
2019-09-17 14:40:31
Motorcycle wire harness wholesalers introduces the terminal line is composed of an electronic connecting wire terminal crimping connector. The main products purchased in the terminal wire processing factory are divided into three categories
-
•
2019-09-17 14:40:12
Motorcycle wire harness wholesalers introduces in the process of electronic wire harness processing, it is very important to check the quality of some production points, which directly affect the quality of the wire harness processing. Feng
-
•
2019-09-17 14:39:53
Motorcycle wire harness wholesalers introduces the processing technology of the wire harness is generally: open wire (cutting and cutting) crimping (branch crimping, terminal crimping) assembly (pre-installation, winding, marking) conductio
-
•
2019-09-17 14:39:26
Motorcycle wire harness wholesalers introduces automotive electronic equipment works in cars with changing driving conditions. The complexity and variability of electromagnetic energy in the environment means that the system is exposed to a
-
•
2019-09-17 14:39:04
Motorcycle wire harness wholesalers suggests connector assembly should grasp the following key links: There are many types of connectors for locomotives. Many connectors have similar shapes and completely different internal structures. When
-
•
2019-09-17 14:38:35
Motorcycle wire harness wholesalers suggests when stripping the wire, the stripping length must be moderate. If the stripping is too short, the wire can not be inserted into the conductor crimping area when the terminal is crimped. The crim
-
•
2019-09-17 14:38:08
Crimp height is too large or too small Motorcycle wire harness wholesalers introduces the crimp height is the cross-sectional height of the crimping zone after crimping, which is the most important feature of good crimping. Excessive crimp
-
•
2019-09-17 14:37:33
Motorcycle wire harness wholesalers introduces there are about 30 wiring harnesses for locomotives. The largest wiring harness consists of about one thousand wires of different lengths. The harness handling needs to be lifted by a crane. Th
-
•
2019-09-17 14:37:14
Some users have burned out the motor during the processing of the electronic wire harness, but dont know what caused it. The following Motorcycle wire harness wholesalers will give you you an analysis of the cause. If the good harness is no
