Motorcycle wire harness wholesalers suggests connector assembly should grasp the following key links:

There are many types of connectors for locomotives. Many connectors have similar shapes and completely different internal structures. When assembling, they are strictly according to the code of the rack. After receiving the materials, they are strictly in accordance with the operation instructions.

When inserting the terminal into the connector jack, grasp the moderate force. When the “click” sound is heard, the terminal is not properly inserted. At this time, the force cannot be continued. The scene caused many quality problems because the operator only inserted the position judgment by the appearance.

The assembled connector should be protected. Most of the connectors are used for locomotive signal lines and control lines. Dust and air moisture in the production site will invade into the connector and cause short circuits between adjacent lines, which seriously affects the signal control of the vehicle. Use the connector to cover the entire connector with a protective cover and tighten it to ensure the quality of the tissue

The wiring harness is a neural network that connects different parts of the locomotive equipment, so the manufactured wiring harness should be perfectly connected to the equipment on the locomotive. When wiring, follow the line route specified by the wiring board, strictly tie it, use only one strap for cross-binding at the intersection, and eliminate the use of multiple lashings, which can effectively prevent the harness from loosening. If you want to learn more about best quality double needle bar raschel knitting machine,you can contact us.