Car chassis wire harness wholesalers introduces this process begins with the design and development of the wiring harness. Automakers provided wire harness manufacturers with 150% of the drawings for vehicle wiring system design. This includes all possible wiring harnesses, depending on the possible choices made by all models.

The harness manufacturer's engineers use this drawing to create a production drawing, work plan, and corresponding parts list. Also, manufacturers regularly issue schedule changes and must adjust the plan accordingly.

As always, when it comes to manual markets, especially if you have to do these tasks under time pressure, the error rate will be high. In addition, manual results depend on the individual's working methods, depending on which engineer is at work, and the production plan may look different. In addition, frequent changes to drawings are not always performed in a timely manner.

Since all of these aspects can compromise quality, it makes sense to use a software control planning system. In such a system, the manufacturer can use the blueprint to determine the rules of the production plan, such as detailing the steps that will be performed mechanically, depending on the different machines, and which production steps will be performed manually or semi-automatically. These rules must be flexible so that they can be adjusted. For example, they might look like this:

If a single wire, and the size 0.35

Based on these rules, the system interprets and analyzes automakers' drawings and generates production data, including work plans and parts lists. In addition to significant savings in working hours, quality advantages are significant due to the elimination of the source of manual failures and the standardization of implementation procedures. If you want to learn more about Motorcycle harness wholesalers,you can contact us.