Motorcycle wire harness processing must have sufficient strength for the Motorcycle wire harness wholesalers.Today, when we talk about wire harness processing, we must have sufficient processing strength. For wire harness processing, the wire must have sufficient strength. If the strength is not enough, it is easy to break due to some external force factors, such as strong wind, icing or It is the reason for improper handling during repair; if a thin wire with a small cross section is selected, it is easy to overheat the current when the overload current is used, so that the protective insulating layer is damaged, and the circuit may be ignited severely; Wires cannot be exposed to excessive voltage loss.

Therefore, when we select the wire for wire processing, we need to choose according to your circuit. If the low-voltage harness is selected, the thickness of the wire is selected according to the heat generation, and then the voltage loss and strength are tested. If it is a high-voltage harness, then you need to select the wire according to its current condition, and then measure its heat and voltage loss. If you want to learn more about transmission wire harness made in China,you can contact us.