The most basic stripping size for Motorcycle wire harness wholesalers, many engineers define length based on experience or physical measurements. In fact, this often overlooked process is also based.

Peeling size reference calculation method (refer to the general requirements, test methods and guidelines for the use of non-welded crimp joints GB-T 18290.2-2000)

This kind of situation is especially applicable to large and medium-sized enterprises such as Japanese companies and Taiwanese enterprises. Everything needs to be marked according to the circumstances.

Next, it is said that crimping and crimping are the most important processes for wire harness processing. They are also the key points for each processing plant to demonstrate technical strength and quality awareness. Most of the requirements for practitioners should be known.

What determines the quality of the crimping? Good electrical properties, low and stable electrical impedance, corrosion resistance, good mechanical properties

Wire harness processing and cutting line precautions

1: wire size must be within tolerance;

2: There must be no scratched wire when cutting the wire, and the incision should be flush;

3: The cut wire is tied for every 50 or 100 pieces. It is necessary to mark the wire gauge and length for each tie, which is not wrong. If you want to learn more about transmission wire harness made in China,you can contact us.